[PATCH] ath10k: logging for state change transitions.

[greearb at candelatech.com]

From: Ben Greear <greearb at candelatech.com>

Print error if device failed to recover.

Signed-off-by: Ben Greear <greearb at candelatech.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b2e7303..ced5eca 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3905,8 +3905,10 @@ static void ath10k_restart_complete(struct ieee80211_hw *hw)
 	/* If device failed to restart it will be in a different state, e.g.
 	 * ATH10K_STATE_WEDGED */
 	if (ar->state == ATH10K_STATE_RESTARTED) {
-		ath10k_info("device successfully recovered\n");
+		ath10k_info("device successfully recovered (state RESTARTED to ON)\n");
 		ar->state = ATH10K_STATE_ON;
+	} else {
+		ath10k_info("device failed to recover (state %d)\n", ar->state);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
-- 
1.7.11.7