Hard lockup on module reload.

[Ben Greear]

I think this might be a known problem, but just in case it
helps, here are the last logs I see before the system is
locked hard (ie, even sysrq over serial terminal does nothing)

This is with today's 'ath' tree, including the RFT patches posted
by Michal.

cfg80211: Regulatory domain changed to country: US
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
ieee80211 phy3: Atheros AR9300 Rev:3 mem=0xffffc90017cc0000, irq=18
ieee80211 phy4: Atheros AR9300 Rev:3 mem=0xffffc90017d40000, irq=19
ath10k_pci 0000:05:00.0: BAR 0: assigned [mem 0xf4400000-0xf45fffff 64bit]


Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com