ath10k: Firmware crash after removing VAP

[Ben Greear]

I had vap1 on an ath10k NIC, and wlan2 also existed.  I deleted
the vap1, and very shortly afterwords, the firmware crashed:

ath10k: firmware crashed!
ath10k: hardware name qca988x hw2.0 version 0x4100016c
ath10k: firmware version: 1.0.0.636
ath10k: target register Dump Location: 0x00401930
ath10k: target Register Dump
ath10k: [00]: 0x4100016C 0x00000000 0x0098EEF0 0x00000000
ath10k: [04]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [08]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [12]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [16]: 0x00000000 0x00000000 0x00000000 0x0098EEF0
ath10k: [20]: 0x00000000 0x00401930 0x00000000 0x00000000
ath10k: [24]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [28]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [32]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [36]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [40]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [44]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [48]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [52]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [56]: 0x00000000 0x00000000 0x00000000 0x00000000

Kernel is 3.11.0-rc1+


Is there any way short of reboot to recover from firmware
crash currently?


Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com