[PATCH v4 05/10] ath10k: decouple suspend code
Michal Kazior
michal.kazior at tieto.com
Tue Jul 16 03:38:54 EDT 2013
Split up fw-related and hw-related suspension code.
Although we don't advertise WoW support to
mac80211 yet it's useful to keep the code in
suspend/resume hooks.
At this point there's no need to keep pci pm ops.
In case of WoW mac80211 calls ath10k_suspend()
which should take care of entering low-power mode.
In case WoW is not available mac80211 will go
through regular interface teradown and use start/stop.
Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 28 -----
drivers/net/wireless/ath/ath10k/core.h | 3 -
drivers/net/wireless/ath/ath10k/hif.h | 19 ++++
drivers/net/wireless/ath/ath10k/mac.c | 66 ++++++++++++
drivers/net/wireless/ath/ath10k/pci.c | 176 ++++++++++----------------------
5 files changed, 138 insertions(+), 154 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3d75c6a..01c1d82 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -648,34 +648,6 @@ void ath10k_core_unregister(struct ath10k *ar)
}
EXPORT_SYMBOL(ath10k_core_unregister);
-int ath10k_core_target_suspend(struct ath10k *ar)
-{
- int ret;
-
- ath10k_dbg(ATH10K_DBG_CORE, "%s: called", __func__);
-
- ret = ath10k_wmi_pdev_suspend_target(ar);
- if (ret)
- ath10k_warn("could not suspend target (%d)\n", ret);
-
- return ret;
-}
-EXPORT_SYMBOL(ath10k_core_target_suspend);
-
-int ath10k_core_target_resume(struct ath10k *ar)
-{
- int ret;
-
- ath10k_dbg(ATH10K_DBG_CORE, "%s: called", __func__);
-
- ret = ath10k_wmi_pdev_resume_target(ar);
- if (ret)
- ath10k_warn("could not resume target (%d)\n", ret);
-
- return ret;
-}
-EXPORT_SYMBOL(ath10k_core_target_resume);
-
MODULE_AUTHOR("Qualcomm Atheros");
MODULE_DESCRIPTION("Core module for QCA988X PCIe devices.");
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index d5b2533..5c94ea0 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -365,7 +365,4 @@ void ath10k_core_stop(struct ath10k *ar);
int ath10k_core_register(struct ath10k *ar);
void ath10k_core_unregister(struct ath10k *ar);
-int ath10k_core_target_suspend(struct ath10k *ar);
-int ath10k_core_target_resume(struct ath10k *ar);
-
#endif /* _CORE_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h
index 00d2940..dcdea68 100644
--- a/drivers/net/wireless/ath/ath10k/hif.h
+++ b/drivers/net/wireless/ath/ath10k/hif.h
@@ -80,6 +80,9 @@ struct ath10k_hif_ops {
/* Power down the device and free up resources. stop() must be called
* before this if start() was called earlier */
void (*power_down)(struct ath10k *ar);
+
+ int (*suspend)(struct ath10k *ar);
+ int (*resume)(struct ath10k *ar);
};
@@ -154,4 +157,20 @@ static inline void ath10k_hif_power_down(struct ath10k *ar)
ar->hif.ops->power_down(ar);
}
+static inline int ath10k_hif_suspend(struct ath10k *ar)
+{
+ if (!ar->hif.ops->suspend)
+ return -EOPNOTSUPP;
+
+ return ar->hif.ops->suspend(ar);
+}
+
+static inline int ath10k_hif_resume(struct ath10k *ar)
+{
+ if (!ar->hif.ops->resume)
+ return -EOPNOTSUPP;
+
+ return ar->hif.ops->resume(ar);
+}
+
#endif /* _HIF_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 4627c16..febba7d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -20,6 +20,7 @@
#include <net/mac80211.h>
#include <linux/etherdevice.h>
+#include "hif.h"
#include "core.h"
#include "debug.h"
#include "wmi.h"
@@ -2749,6 +2750,67 @@ static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
return 1;
}
+#ifdef CONFIG_PM
+static int ath10k_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ ar->is_target_paused = false;
+
+ ret = ath10k_wmi_pdev_suspend_target(ar);
+ if (ret) {
+ ath10k_warn("could not suspend target (%d)\n", ret);
+ return 1;
+ }
+
+ ret = wait_event_interruptible_timeout(ar->event_queue,
+ ar->is_target_paused == true,
+ 1 * HZ);
+ if (ret < 0) {
+ ath10k_warn("suspend interrupted (%d)\n", ret);
+ goto resume;
+ } else if (ret == 0) {
+ ath10k_warn("suspend timed out - target pause event never came\n");
+ goto resume;
+ }
+
+ ret = ath10k_hif_suspend(ar);
+ if (ret) {
+ ath10k_warn("could not suspend hif (%d)\n", ret);
+ goto resume;
+ }
+
+ return 0;
+resume:
+ ret = ath10k_wmi_pdev_resume_target(ar);
+ if (ret)
+ ath10k_warn("could not resume target (%d)\n", ret);
+ return 1;
+}
+
+static int ath10k_resume(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ ret = ath10k_hif_resume(ar);
+ if (ret) {
+ ath10k_warn("could not resume hif (%d)\n", ret);
+ return 1;
+ }
+
+ ret = ath10k_wmi_pdev_resume_target(ar);
+ if (ret) {
+ ath10k_warn("could not resume target (%d)\n", ret);
+ return 1;
+ }
+
+ return 0;
+}
+#endif
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_tx,
.start = ath10k_start,
@@ -2769,6 +2831,10 @@ static const struct ieee80211_ops ath10k_ops = {
.set_frag_threshold = ath10k_set_frag_threshold,
.flush = ath10k_flush,
.tx_last_beacon = ath10k_tx_last_beacon,
+#ifdef CONFIG_PM
+ .suspend = ath10k_suspend,
+ .resume = ath10k_resume,
+#endif
};
#define RATETAB_ENT(_rate, _rateid, _flags) { \
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index c15b0c5..75f5427 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1796,6 +1796,55 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
ath10k_do_pci_sleep(ar);
}
+#ifdef CONFIG_PM
+
+#define ATH10K_PCI_PM_CONTROL 0x44
+
+static int ath10k_pci_hif_suspend(struct ath10k *ar)
+{
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+ struct pci_dev *pdev = ar_pci->pdev;
+ u32 val;
+
+ pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+ if ((val & 0x000000ff) != 0x3) {
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+ (val & 0xffffff00) | 0x03);
+ }
+
+ return 0;
+}
+
+static int ath10k_pci_hif_resume(struct ath10k *ar)
+{
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+ struct pci_dev *pdev = ar_pci->pdev;
+ u32 val;
+
+ pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+ if ((val & 0x000000ff) != 0) {
+ pci_restore_state(pdev);
+ pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+ val & 0xffffff00);
+ /*
+ * Suspend/Resume resets the PCI configuration space,
+ * so we have to re-disable the RETRY_TIMEOUT register (0x41)
+ * to keep PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+ }
+
+ return 0;
+}
+#endif
+
static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
.send_head = ath10k_pci_hif_send_head,
.exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg,
@@ -1808,6 +1857,10 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
.get_free_queue_number = ath10k_pci_hif_get_free_queue_number,
.power_up = ath10k_pci_hif_power_up,
.power_down = ath10k_pci_hif_power_down,
+#ifdef CONFIG_PM
+ .suspend = ath10k_pci_hif_suspend,
+ .resume = ath10k_pci_hif_resume,
+#endif
};
static void ath10k_pci_ce_tasklet(unsigned long ptr)
@@ -2376,128 +2429,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
kfree(ar_pci);
}
-#if defined(CONFIG_PM_SLEEP)
-
-#define ATH10K_PCI_PM_CONTROL 0x44
-
-static int ath10k_pci_suspend(struct device *device)
-{
- struct pci_dev *pdev = to_pci_dev(device);
- struct ath10k *ar = pci_get_drvdata(pdev);
- struct ath10k_pci *ar_pci;
- u32 val;
- int ret, retval;
-
- ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
-
- if (!ar)
- return -ENODEV;
-
- ar_pci = ath10k_pci_priv(ar);
- if (!ar_pci)
- return -ENODEV;
-
- if (ath10k_core_target_suspend(ar))
- return -EBUSY;
-
- ret = wait_event_interruptible_timeout(ar->event_queue,
- ar->is_target_paused == true,
- 1 * HZ);
- if (ret < 0) {
- ath10k_warn("suspend interrupted (%d)\n", ret);
- retval = ret;
- goto resume;
- } else if (ret == 0) {
- ath10k_warn("suspend timed out - target pause event never came\n");
- retval = EIO;
- goto resume;
- }
-
- /*
- * reset is_target_paused and host can check that in next time,
- * or it will always be TRUE and host just skip the waiting
- * condition, it causes target assert due to host already
- * suspend
- */
- ar->is_target_paused = false;
-
- pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
-
- if ((val & 0x000000ff) != 0x3) {
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
- (val & 0xffffff00) | 0x03);
- }
-
- return 0;
-resume:
- ret = ath10k_core_target_resume(ar);
- if (ret)
- ath10k_warn("could not resume (%d)\n", ret);
-
- return retval;
-}
-
-static int ath10k_pci_resume(struct device *device)
-{
- struct pci_dev *pdev = to_pci_dev(device);
- struct ath10k *ar = pci_get_drvdata(pdev);
- struct ath10k_pci *ar_pci;
- int ret;
- u32 val;
-
- ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
-
- if (!ar)
- return -ENODEV;
- ar_pci = ath10k_pci_priv(ar);
-
- if (!ar_pci)
- return -ENODEV;
-
- ret = pci_enable_device(pdev);
- if (ret) {
- ath10k_warn("cannot enable PCI device: %d\n", ret);
- return ret;
- }
-
- pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
-
- if ((val & 0x000000ff) != 0) {
- pci_restore_state(pdev);
- pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
- val & 0xffffff00);
- /*
- * Suspend/Resume resets the PCI configuration space,
- * so we have to re-disable the RETRY_TIMEOUT register (0x41)
- * to keep PCI Tx retries from interfering with C3 CPU state
- */
- pci_read_config_dword(pdev, 0x40, &val);
-
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
- }
-
- ret = ath10k_core_target_resume(ar);
- if (ret)
- ath10k_warn("target resume failed: %d\n", ret);
-
- return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(ath10k_dev_pm_ops,
- ath10k_pci_suspend,
- ath10k_pci_resume);
-
-#define ATH10K_PCI_PM_OPS (&ath10k_dev_pm_ops)
-
-#else
-
-#define ATH10K_PCI_PM_OPS NULL
-
-#endif /* CONFIG_PM_SLEEP */
-
MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
static struct pci_driver ath10k_pci_driver = {
@@ -2505,7 +2436,6 @@ static struct pci_driver ath10k_pci_driver = {
.id_table = ath10k_pci_id_table,
.probe = ath10k_pci_probe,
.remove = ath10k_pci_remove,
- .driver.pm = ATH10K_PCI_PM_OPS,
};
static int __init ath10k_pci_init(void)
--
1.7.9.5
More information about the ath10k
mailing list