[PATCH 2/7] ath10k: make target_ce_config_wlan more readable

Kalle Valo kvalo at qca.qualcomm.com
Fri Aug 30 08:30:14 EDT 2013


It's easier to read t if the field names are visible.

Signed-off-by: Kalle Valo <kvalo at qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   85 ++++++++++++++++++++++++++++-----
 1 file changed, 71 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index cf7a3e4..304bd4f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -125,21 +125,78 @@ static const struct ce_attr host_ce_config_wlan[] = {
 
 /* Target firmware's Copy Engine configuration. */
 static const struct ce_pipe_config target_ce_config_wlan[] = {
-	/* host->target HTC control and raw streams */
-	{ /* CE0 */ 0, PIPEDIR_OUT, 32, 256, CE_ATTR_FLAGS, 0,},
-	/* target->host HTT + HTC control */
-	{ /* CE1 */ 1, PIPEDIR_IN, 32, 512, CE_ATTR_FLAGS, 0,},
-	/* target->host WMI */
-	{ /* CE2 */ 2, PIPEDIR_IN, 32, 2048, CE_ATTR_FLAGS, 0,},
-	/* host->target WMI */
-	{ /* CE3 */ 3, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,},
-	/* host->target HTT */
-	{ /* CE4 */ 4, PIPEDIR_OUT, 256, 256, CE_ATTR_FLAGS, 0,},
+	/* CE0: host->target HTC control and raw streams */
+	{
+		.pipenum = 0,
+		.pipedir = PIPEDIR_OUT,
+		.nentries = 32,
+		.nbytes_max = 256,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
+	/* CE1: target->host HTT + HTC control */
+	{
+		.pipenum = 1,
+		.pipedir = PIPEDIR_IN,
+		.nentries = 32,
+		.nbytes_max = 512,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
+	/* CE2: target->host WMI */
+	{
+		.pipenum = 2,
+		.pipedir = PIPEDIR_IN,
+		.nentries = 32,
+		.nbytes_max = 2048,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
+	/* CE3: host->target WMI */
+	{
+		.pipenum = 3,
+		.pipedir = PIPEDIR_OUT,
+		.nentries = 32,
+		.nbytes_max = 2048,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
+	/* CE4: host->target HTT */
+	{
+		.pipenum = 4,
+		.pipedir = PIPEDIR_OUT,
+		.nentries = 256,
+		.nbytes_max = 256,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
 	/* NB: 50% of src nentries, since tx has 2 frags */
-	/* unused */
-	{ /* CE5 */ 5, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,},
-	/* Reserved for target autonomous hif_memcpy */
-	{ /* CE6 */ 6, PIPEDIR_INOUT, 32, 4096, CE_ATTR_FLAGS, 0,},
+
+	/* CE5: unused */
+	{
+		.pipenum = 5,
+		.pipedir = PIPEDIR_OUT,
+		.nentries = 32,
+		.nbytes_max = 2048,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
+	/* CE6: Reserved for target autonomous hif_memcpy */
+	{
+		.pipenum = 6,
+		.pipedir = PIPEDIR_INOUT,
+		.nentries = 32,
+		.nbytes_max = 4096,
+		.flags = CE_ATTR_FLAGS,
+		.reserved = 0,
+	},
+
 	/* CE7 used only by Host */
 };
 




More information about the ath10k mailing list